Demolition Shear GVP 15 - 

The all-round performer for all demolition situations:
A perfect synthesis of performance and cost-effectiveness. GENESIS demolition shears allow you to perform all your demolition tasks with confidence. The three jaw types – concrete cracker, scrap shear, wire cutters – open up a wide range of applications in the fields of demolition, scrap processing, recycling and cable recycling. The jaws can be exchanged in a matter of minutes, thanks to the quickchange jaw mounting. The specific positioning of the main bearing maximises the cutting and breaking force. The exclusive use of high-quality components maximises reliability while minimising maintenance requirements. You can be sure that in the tough reality of everyday work, GENESIS VersiPro demolition shears keep the promise that we make to you today: capability you can rely on.

The Sum of Impressive Features

1. The Piercing Tip

Patented bolt-on piercing tip eliminates welding and is replaced in minutes.

2. The Cutting Blades

For optimum cutting performance! The four identical cutting blades on the upper and lower jaws are four-times usable with four cutting edges per blade!

3. The Front Razor Blade

Four-times usable with four cutting edges per blade, eliminates wear inside the lower jaw.

4. The Guide Blades

Exclusive dual guide-blade system can be shimmed to the piercing tip on both sides of the lower jaw. The two identical guide blades are four-times usable with four cutting edges per blade.

5. The Main Shaft

Each jaw set is designed to maintain its own HD main pivot group and pin positioning . Allowing to optimize the power curve for each application. The pin connections allow safe jaw changing in less than ten minutes, without the need for special tools.

6. The Pin Connection

Removable lower jaw set pin connection makes jaw changing easy and safe in the field using standard tools. Just remove the bolt and pull the pin.

7. The Quality of Materials

High-strength and abrasionresistant steel body for maximum performance and service life.

8. The Slewing Ring

For maximum flexibility. 360° continuously rotating slewing ring is oversized to ensure optimum force distribution.

9. The Hydraulic Components

All hydraulic components are fully and neatly protected inside mounting bracket with large access holes.

10. The Cylinder Connection Pin

Easy to handle and can be removed manually.

Concrete Cracker

The Cracker Teeth

Abrasion-resistant tooth profile improves concrete processing!

Wire Cutter

1. The Blades

The two identical bolted-on blades can be resharpend many times.

2. The Blade Geometry

For reliably clean cuts!

3. Small Blade Clearance

Also cuts small-diameter wire. Easy to adjust.

Technical Data

GVP 15 with Scrap Shear

  • Weight (kg): 1.450
  • Max. Cutting Force (kN): 2.980
  • Oil Flow (l/min): 170
  • Jaw Opening A (mm): 406
  • Jaw Depth B (mm): 381
  • Length C (mm): 2.348
  • Excavator Weight Boom Mounted (t): 9
  • Excavator Weight Stick Mounted (t): 12

GVP 15 with Concrete Cracker

  • Weight(kg): 1.450
  • Oil Flow (l/min): 170
  • Jaw Opening A (mm): 635
  • Jaw Depth B (mm): 635
  • Length C (mm): 2.500
  • Excavator Weight Boom Mounted (t): 9
  • Excavator Weight Stick Mounted (t): 12

GVP 15 with Wire Cutter

  • Weight (kg): 1.335
  • Max. Closing Force (kN): *362
  • Oil Flow (l/min): 170
  • Jaw Opening A (mm): 342
  • Jaw Depth B (mm): 394
  • Length C (mm): 2.580
  • Excavator Weight Boom Mounted (t): 9
  • Excavator Weight Stick Mounted (t): 12
  1. Operating pressure of Shear Jaw and Cracker Jaw: 350 bar.
  2. *Operating pressure of Wire Cutter: 120 bar.
  3. GENESIS VersiPro Multi Processors are covered by a 12 month warranty
  4. GENESIS VersiPro is available with one, two or more different jaw sets.

Picture Gallery