Demolition Shears LXP
The LXP combines both the power of a single tool attachment with the versatility needed in the demolition application. Available in four sizes - to fit excavators in the 20, 30, 40 and 50 t class - the LXP's advantages stem from its inherent design characteristics.
- Power
Revolutionary, patent pending pivot group location delivers maximum cuttuing and crushing power to each jaw set
- Versatility
The LXP offers three different jaw sets
- Shear Jaws
- Concrete Cracker Jaws
- Pulverizer Jaws
which can be exchanged in record
time
- Speed
GENESIS proprietary speed valves deliver the fastest cycle times resulting in maximum production.
- Efficiancy
The Jaw sets can be changed in 15 minutes, this reduces downtime by hours and increases safety and profits.
LXP with Shear Jaw Set
1
2
3
4
5
6
7
1. Patented bolt-on piercing tip eliminates welding and is replaced in minutes
2. Exclusive four identical cutting blades on upper and lower jaws are four times usable with four cutting edges per blade
3. Exclusive dual guide blades can be shimmed to the piercing tip. Both identical guide blades are four times usable with four cutting edges per blade
4. Manual removal of two easy-to-handle cylinder connection pins is all that’s required to change between jaw sets – the patented hydraulic quick-change does the rest of the work. Jaw change-outs are safe and fast – completed in minutes instead of hours
5. Patent-pending pivot group location on LXP shear jaws is positioned forward to create maximum shearing power. More piercing, apex and throat power result in more steel-cutting production. Pivot group always remains intact with the shear jaw set eliminating cumbersome and unsafe manual pin change- out common to other processors
6. Hydraulic moveable Secure-Lock pin allows for quick change-outs between other jaw sets
7. The shrouded steel superstructure provides strength while protecting both cylinders and regeneration (speed) valves. Genesis proprietary speed valves deliver the fastest cycle times possible resulting in maximum production. Regen valves are factory-set and never need adjusting
Cracker Jaw Set
1
2
1. The fully enclosed bolt-on teeth
protect the parent material from damage and wear
protect the parent material from damage and wear
2. Bolt-on cutting blades are four times usable with four cutting edges per blade
Pulverizer Jaw Set
1
2
3
4
1. The ultimate in wear and impact resistant pulverizing teeth eliminate all welding maintenance
2. Proprietary over-sized pivot group always remains intact with the pulverizer jaws eliminating cumbersome and unsafe manual pin change-out common to other processors
3. Optimum pivot point generates maximum crushing and pulverizing power
4. Custom tooth profile maximizes crushing force and easily pulverizes concrete from rebar like no other processor
select language:
